How do I contact Coerco?
Call Coerco on 1800 646 277
Fax Coerco on (08) 9661 1515
Where is my nearest Coerco retail agent?
To find a Coerco Agent near you:
- To find a Coerco Agent near you
- call our toll free number 1800 646 277.
Why should I consider a rainwater tank?
Australia is one of the driest continents on earth. As rural and urban population growth expands, our demand on existing water resources will increase. It is everyone’s responsibility to reduce our footprint on earth and reduce, reuse and recycle. This includes harvesting water for personal and industrial use.
Why should I purchase a Coerco product?
Coerco is Western Australia’s leading polyethylene tank and product manufacturer and has been servicing WA for over 15 years.
- A huge product range covering nearly every aspect of industry
- Traditional and modern designs
- Tanks & Tank Combinations ranging from 250 to 64,000 litres
- Strong and durable, will not rust, crack or corrode
- UV stabilised to cope with Australia’s harsh conditions
- Full Manufacturer’s no fuss warranty
- 12 COLORBOND® tank colours to chose from
- Coerco is certified with SAI Global to AS/NZS ISO 9001 (Quality Management Systems – Requirements)
- Available from all good hardware, garden or water specialist retailers
What do I need to consider before I buy a rainwater tank?
Try to select the largest possible tank capacity for the area you have available. In rural locations, space is not always a problem and so a traditional round tank is the best solution. However, in residential areas space can be a real problem, particularly if you are limited to locating the tank down the side of a house or in a small back yard and in these situations a Slimline tank may be more practical.
How do I calculate my rain harvesting capacity?
1mm of rain on 1 sq. meter of roof area will give you 1 litre of water in your tank.
What are Coerco made from?
Coerco rainwater tanks are made using high quality UV stabilised food-grade polyethylene.
Is my roof surface suitable for collecting rainwater?
The most suitable roofing materials for collecting potable water* are:
- Colorbond® steel sheets or tiles
- Zincalume® steel sheets or tiles
- Glazed tiles well fired
- Concrete/cement tiles
- Clay tiles
(* potable water is water fit for human consumption – safe drinking water)
Do poly tanks split at the seams?
There are no seams in Coerco poly tanks. Parting lines may be visible on the outside where the lid meets the wall of the tank that look like joins. This is where the lid and base moulds join together. Coerco tanks are not made from two sides joined together, they are formed as one solid piece during the rotomoulding process and under NO circumstances are tank lids removed for transport.
Are insects a problem with Rainwater Tanks?
To prevent insects, such as mosquitoes breeding and contamination, it’s that vital guttering and pipe work should be self-draining and fitted with drainage points and screens.
What accessories come with Coerco tanks?
Different tanks come with different fittings – generally, all tanks come with a moulded poly lid (with leaf strainer fitted as optional), a threaded brass outlet, ball valve, overflow elbows and screens – check with Coerco 1800 646 277 for confirmation on your specific tank.
How much are Coerco tanks?
Coerco retail agents will be able to provide specific quotations on pricing and delivery costs. Click here to find your nearest Coerco Agent Location or call 1800 646 277
What type of base do I need for my tank?
You require a solid, level, compacted base, that extends beyond the diameter of the tank that will not be eroded by wind or rain. Suitable bases include brick, concrete, gravel or compacted sand surface between 300mm and 400mm in depth. More about Site Preparation & Installation.
Can I install my Coerco tank in the ground?
No – unless you have purchased a specific Coerco underground tank, you should not locate / install any part of your Coerco tank underground.
How much does delivery cost for Coerco tanks?
Tanks 9000 litres and above Coerco will deliver to the tank site free of charge within 800km of Perth metropolitan area. All other product is delivered free into store to your nearest Coerco retail agent. (conditions apply) For remote areas competitive freight rates are available, contact your local agent for a quotation.
Can I drink rainwater from my Coerco tank?
Yes, although some people prefer to filter their tank water for drinking. Coerco tanks are made from food grade polyethylene and will not taint or colour the water. It is important to ensure that all roof areas and gutters are clean.
Do I need a plumber to install my Coerco tank?
If you are installing a water switch and pump to connect your Coerco tank to your home water outlets (i.e. to connect to laundry and toilet) you will need a licensed plumber for this installation. Your plumber will also need to certify the installation for documents used in processing ‘Water Rebates’ that are offered by local, state or federal governments for installing water tanks on residential properties – see FAQ 18.
What rebates are available for installing rainwater tanks?
For up to date information on rain water tank rebates available from local, state and federal governments in Western Australia please check the following website portal.water.wa.gov.au
How much rainfall is there in my area?
For up to date statistics on average rainfall in your area, log on to the Australian Bureau of Meteorology www.bom.gov.au
Should I clean my tank out?
Rainwater is harvested from roofs, channelled down gutters and through downpipes. These surfaces can also catch dirt and dust that can be captured in your rainwater tank through the water collection process. Leaf strainers, gutter guards and other filtration systems (both in and out of the tank) all provide protection against dirt and dust entering your tank. It is beneficial to clean your Coerco tank every 2 to 3 years to remove sediment and ensure the highest quality water possible is being stored in your tank. NEVER ENTER A TANK ALONE, ALWAYS HAVE AN ATTENDANT STANDING BY